DIY Diamond Macrame Wall Hanging

DIY Diamond Macrame Wall Hanging

In this easy to follow, step-by-step tutorial (DIY Diamond Macrame Wall Hanging), I’ll show you how to make this quick and easy, not to mention cute, diamond macrame wall hanging. Whether you’re a beginner or have some prior experience crafting with knots, you should have no trouble creating this wall hanging and more from the pattern I will guide you through.

This is a simple macrame wall hanging pattern for beginner/intermediate level. You will need to be familiar with the larks head knot, square knot, and double-half hitch knot. Please read my earlier article ‘Macrame for Beginners – Part 1: 4 Basic Macrame Knots‘ or watch the video ‘Macrame for beginners – part 1‘ to learn these if you’re not familiar with them. I hope you enjoy this tutorial and find it easy to follow.

Read more
MACRAME FOR BEGINNERS – Pt 2: How To Make A Macrame Feather/Leaf

MACRAME FOR BEGINNERS – Pt 2: How To Make A Macrame Feather/Leaf

If you’ve been wanting to make macrame items but haven’t known where to begin, this series on ‘Macrame For Beginners’ is exactly what you need. I’ll be covering the basics you need to know, to get you started in this craft that is growing faster in popularity than the latest TikTok trend, and quickly becoming the hottest decor theme this decade.

If you haven’t already read my article on the ‘7 basic supplies to begin macrame‘, then check it out so you can stock up and be ready to get started making amazing macrame pieces.

Also check out Macrame For Beginners: Part 1 to learn 4 of the basic macrame knots that you will use extensively throughout your macrame work.

Read more
DIY Boho Coasters – Macrame and Twine Coasters

DIY Boho Coasters – Macrame and Twine Coasters

If you love the look of these boho coasters but aren’t particularly in love with the common price tag, then this quick and easy tutorial for making your own DIY Boho Coasters is what you need to read. With just 3 materials, you can bring a boho vibe to your dinner or coffee table without the need to sell a kidney to pay for it. Plus it’s a fun and relaxing activity that you could possibly even get the kids involved with, if you want it to be slightly less relaxing (jk, not really).

Read more
MACRAME FOR BEGINNERS – Pt 1: 4 Basic Macrame Knots

MACRAME FOR BEGINNERS – Pt 1: 4 Basic Macrame Knots

If you’ve been wanting to make macrame items but haven’t known where to begin, this series on ‘Macrame For Beginners’ is exactly what you need. I’ll be covering the basics you need to know, to get you started in this craft that is growing in popularity every day. If you haven’t already read my article on the ‘7 basic supplies to begin macrame‘, then check it out so you can stock up and be ready to get started making amazing macrame pieces.

Read more
7 Basic Supplies to Begin Macrame

7 Basic Supplies to Begin Macrame

Hi, welcome to my blog. In this article I am going to tell you about the 7 basic supplies to begin macrame.

Macrame is a craft that was huge in the 1960’s and 1970’s, but it has made a come-back and is now more popular than ever. The bohemian/hippy style is a trending decor theme that oozes both style and an aesthetic of warmth and comfort. It’s not hard to see why so many people are now taking up the craft.

Macrame is not a difficult craft to learn and even the newest macrame crafters can whip up a simple macrame wall hanging or plant hanger, but learning the basics is always an important start to learning any craft.

Before you begin learning and going on to create masterpieces, you will need to gather some supplies.

Read more

DIY Rustic Storage/Serving Tray

91165532_231409358006647_9124581651538509824_n

With all this staying at home and keeping away from other people, there can be days when all you want to do is kick back in bed or on the couch when it comes to brekkie, lunch or dinner. If you have kids, it’s more like supper time (when they are all in bed), or you might be lucky enough to have a gorgeous partner who will give you that odd sleep in, with brekkie in bed as a bonus. Either way, chances are there will likely be an occasion that calls for a serving tray.

But with strained finances being all too common right now, it can be too much of a luxury to justify purchasing one, plus it’s likely that many of the stores that sell them are closed, so popping down to the store to get one isn’t likely an option. However, did you know that you could make a serving tray out of recycled wood and other things you may have lying around the house or shed?

I made this serving tray from pallet wood and some brand new corner brackets I found in a drawer that obviously came with a piece of furniture (or perhaps a smart TV, for wall mounting) at some point in time. I couldn’t remember though, and so I decided to use them for this project. I didn’t just make a regular serving tray though, because why make an item that only has one use and sits in the cupboard waiting for the opportune time to make an appearance? This tray doubles as a storage tray, for all your organizing needs in the kitchen, dining room, study or bedroom and transforms into a handy serving tray, with the help of an insert.

Now you can make this tray exactly the way I did if you have all the same materials I used, or you can get creative and use what you have at home to make something similar. If your not much of a handyman and would rather buy one, and you have the funds, then you can purchase one from me, as I’ve just started selling these on my new Etsy store (and yes, I will definitely get a commission if you buy one, haha).

This page contains affiliate links that may earn me a commission (without any extra cost to you) if you click on a link and make a purchase. Please visit our privacy policy for more information. Affiliate links are how I keep this blog running, thank you.

86364350_491176148239224_1226746696730411008_nRustic Storage/Serving Tray From Reclaimed Wood (Buy it Now)


Tools & Items you’ll need:

This is a list of the supplies and tools I used, and the links are suggestions of where you might buy these items online if you don’t have them already. For the sake of full disclosure, yes they are affiliate links.

Supplies:

  • Pallet wood (Heat-Treated only, should have an HT stamp on it), or any scrap wood that will do the job (as long as no chemicals have been spilled on them)
  • Nails 30 x 1.6mm (I use bullet head nails as they are harder to see in the finished product)
  • Small screws (black)
  • Steel Brackets (whichever size you like)
  • Drawer handles (From an old set of drawers or bought new)
  • Can of black spray paint
  • Wood stain (I used brown japan)
  • Boiled Linseed oil (or you can use tung oil)

Tools:




Instructions:

Step 1:

First, if you’re using pallet wood you’ll need to remove the wood from the pallet. I’ve tried a few different ways of doing this but by far the easiest way is to use a hammer. Stand the pallets up vertically and use the hammer to hit the wood away from the supporting beam. When there is a big enough gap, use the prong end of the hammer to lever the wood away from the supporting beam, repeat this for all nailed sections. If your feeling strong, you could also use a crowbar to lever them off the supporting beams or pallet blocks. Then hammer out all the nails.

I found a good article about choosing the right wood to use for DIY projects. You can read it HERE.

82410669_168042877875362_2392368703099371520_n

Step 2

Time to measure and cut. You can make this tray to any size you like, I went with 45cm x 30cm (on the inside) so the longer base pieces and longer side pieces were 45cm long. The two shorter side pieces needed to be 30cm plus the thickness of the two smaller side pieces. My wood was approximately 1.5cm thick so I needed to add an extra 3cm to each of the smaller side pieces.

Step 3

Sand your pieces back with an 80grit sandpaper first. I find the belt sander is a little faster than the orbital and great at getting down to the bare wood. Then I go over it with the orbital at 240grit.

82569480_182987246147415_2142199107354099712_n

This is what my cut and sanded wood looked like.

sanded wood

As you can see I used some pretty rough wood, as I was aiming for an authentic rustic look.

Step 4

Now for the nailing. Here is where a nail gun would come in handy and make the job a lot quicker, but that’s on my list of “tools to get next”, so I used a hammer and 30mm x 1.6mm bullet head nails. You could use wood glue on the bottom boards if you wanted to as well, but you would need to let the glue dry overnight before putting in the nails. I found it easiest to nail on the longer side pieces first, then work my way from there. I used a vice for some of it, to hold a base piece while I nailed a side piece to it.

87794799_197734981291145_5047298351960162304_n

The completed box is the storage tray, with sides 7cm high. This is a little high for a serving tray, so I made an insert that could hold a plate or bowl at a comfortable height.

Your insert will need to be slightly smaller than your inner measurement so mine was 29.5cm wide and I made it square so 29.5cm x 29.5cm.

Step 5

Try to use wood from the same pallet or similar wood to whatever you used for your tray. I didn’t have any wood from the same pallet left so I used wood from another pallet that was wider. I only needed two pieces to get the 29.5cm width I was after. Cut and sand your wood and cut two smaller pieces to fix to the bottom of your tray to raise it up. Like this:

87130181_495663711375850_4774305239874404352_n

Just a note: Only the right piece is in position, the left one should be parallel on the left side. I forgot to take a photo of the completed insert.

The idea is that they hold the two (or however many pieces you use) together. If you use more than 2 pieces for your insert, I would recommend gluing them together first, for extra strength before putting on the base pieces. These two base pieces are like feet, they hold the boards together and lift the tray at the same time so that your storage tray becomes a serving tray.

Step 6

Time to stain, with whatever stain you have chosen. I used brown japan but instead of painting it on as is, I added it to boiled linseed oil for a one-step application. Be sure to consult the directions on the back of the tin as to what ratio of stain to oil you use if you decide to go this way. I used a low ratio of stain to oil, so it came out quite light and I ended up doing three coats of stain and oil, with 24 hours drying time in-between. The next time I made one of these I used a higher ratio of stain and only had to do two coats of stain and oil. You should have at least two coats of the oil though in order to achieve the level of sealant you want.

Raw linseed oil is more natural but can take up to a week to dry completely and fully penetrate the wood. Boiled linseed oil has drying agents added so that it dries faster and makes the wood more durable and reduces the likelihood of a sticky finish. Boiled linseed oil as apposed to raw linseed oil, dries faster and lighter and is best for indoor or decor items (not recommended for food prep because of the drying agents), whereas raw linseed oil is better for outdoor items as it helps wood retain its natural moisture content while aiding water repellence and retards cracking and shrinking. It also improves and delays weathering (great for outdoor furniture).

Step 7

Once your last coat of sealant is dry, you’ll want to add your embellishments. I spray painted my brackets with black paint & primer in one before adding them to the corners of my tray and used small black screws.

86393114_559304881609182_2836440361268674560_n

I found the brackets were not only a great decorative feature but also served to re-enforce the joints to make the tray stronger and more durable.

Last but not least you want to add your handles. Measure out where your holes need to go and drill pilot holes on each side of your tray, before attaching your handles with the screws provided with your handles (if you bought them) or use flat tipped screws.

And now your tray with insert should be complete:


orbital sander

Bosch PEX 220 A Orbital Disc Sander (Buy it Now)


Thanks

I hope you enjoyed this article and found it useful. If you’d like to read more DIY articles, head to our DIY MUM page or sign up to the DIY MUM newsletter by filling in the form below.

If you’d like to receive our Mum Life Stories newsletter and keep up to date with all our latest news, stories and promos (including giveaways & writing competitions) then why not sign up to our MLS email list. You’ll also receive a FREE Ebook, exclusive to email subscribers. Click HERE or fill out the form below.

83130178_165785694758743_145881042404769792_n


Get your FREE Ebook

Accomplish more IN a fraction of the time

The pace and intensity of our lives, both at work and at home, leave many of us feeling like a person riding a frantically galloping horse. Our day-to-day incessant busyness — too much to do and not enough time.

With this ebook you will learn to approach your days in another way, reducing stress and getting results through prioritizing, leveraging and focus!

ebook button